EcoSmart ECO 24 Bedienungsanleitung PDF herunterladen

INSTALLATION INSTRUCTIONS

EcoSmart

LED Downlight

with Integrated Trim

FIGURE 1

Diameter Range

Minimum distance

between edge of

ﬁxture and top of

housing or other

obstruction.

6.5”

5 3/4”-6 1/2”

STEP 1:

Remove EcoSmart Downlight ﬁxture from

the packaging and rotate the “Flip Clips”

clockwise until the clips are oriented di-

rectly away from the ﬁxture. This position

is the “installation ready” position.

STEP 2:

Make sure the POWER IS TURNED OFF at

the source to the recessed housing(s) that

you are installing the ﬁxture(s) in.

STEP 3:

Once power has been turned o, remove

existing trim and bulb, revealing the exist-

ing socket.

STEP 4:

Locate the socket in your existing re-

cessed housing and remove any screws

that prevent the socket bracket from be-

ing removed.

STEP 4a:

Pull socket assembly, including the

bracket, as low as possible given the exist-

ing wire length available. (May require

socket plate removal) Remove any excess

bracketry from socket. Care should be

taken not to damage wiring during this

process.

STEP 4b:

Once you have removed the excess brack-

etry from the socket, you are now ready

to install the EcoSmart Downlight ﬁxture.

TO INSTALL:

ECO-575L, ECO-GU24-575L

IMPORTANT SAFETY INFORMATION

Read all instructions before installation

WARNING - Risk of Electric Shock. Disconnect power at fuse or circuit

breaker before installing or servicing.

Note: (1) It may be necessary to remove a socket mounting plate for

adequate clearance. (2) Each lampholder shall be installed only in its

intended manner and orientation. (3) Not all existing recessed housings

that meet these requirements will be compatible with the EcoSmart

Downlight. To ensure compatibility, a test installation should be

conducted. (4) Suitable for damp locations.

RECESSED HOUSING AND DIMMER COMPATIBILITY

The EcoSmart LED Downlight is designed to install in standard 6” recessed

downlight housings.

For a list of compatible housings, refer to www.CreeLEDlighting.com.

Compatible with most dimmers when used with multiple EcoSmart

Downlight ﬁxtures. Consult www.CreeLEDLighting.com for a compatibility

chart.

Compatibility of housings not on this list may be determined by

measurement of the housing as detailed in the attached drawing (Figure 1).

1 2

Inhaltsverzeichnis

Seite 1 - LED Downlight

INSTALLATION INSTRUCTIONSEcoSmartTM LED Downlight with Integrated Trim FIGURE 1Diameter RangeMinimum distancebetween edge of ﬁxture and top of housing

Seite 2 - DOWNLIGHT

NOTE: This device is not intended for use with emergency exit ﬁxtures or emergency exit lights.LPN000046 Rev.E U.S. Patent # 7,213,940U.S. & F

Weitere Dokumente für Warmwasserbereiter & Kessel EcoSmart ECO 24

Um das Dokument anzuzeigen EcoSmart ECO-24 Wartungshandbuch

EcoSmart ECO-24 Wartungshandbuch (24 Seiten)

Um das Dokument anzuzeigen EcoSmart ECO-24 Bedienungsanleitung

EcoSmart ECO-24 Bedienungsanleitung (8 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

EcoSmart ECO 24 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Warmwasserbereiter & Kessel EcoSmart ECO 24 herunter. EcoSmartTM LED Downlight with Integrated Trim Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Warmwasserbereiter & Kessel EcoSmart ECO 24

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Warmwasserbereiter & Kessel EcoSmart ECO 24